Your basket is currently empty.
Our flooring is designed and engineered to make installation simple. Atrafloor is a sheet vinyl product requiring only standard installation techniques. It can be installed by any flooring fitter or competent DIY person.
Our installation guide gives detailed instructions, and the summary we have provided below gives a quick overview.
Download our detailed step-by-step installation guide.
DownloadLay 4-6mm plywood in the room, and install Atrafloor on top.
Murafloor can be installed directly onto level concrete.
Apply a self levelling compound and install Murafloor on top.
Atrafloor arrives in 1.4m wide strips. We provide a layout diagram to show how your floor fits together. Multiple strips fit together easily, and our cold weld sealing method makes joins virtually invisible.
Use the diagram to layout the floor in your room. When installing multiple strips, overlap panels by 20mm and visually match the floor until pattern match is achieved. This process is similar to what you would do when matching wallpaper.
For high traffic areas and rooms over 15 sqm, we recommend gluing your flooring down using Ball F44 adhesive. Follow the manufacturer’s guidelines and apply evenly to the floor. Fit a single strip at a time and repeat for additional strips.
Using a sharp knife, overlapped panels should be double cut to create a tight seam in the floor that is almost invisible. Cold weld solution can then be applied on the seam to seal the floor and make it watertight.
Use a bolster chisel to press the vinyl against the skirting board and cut away excess with a sharp knife.
Download our in-depth installation guide below.